NBN FTTP Connection Box Status Lights
The article will explain the meaning of the status lights found on the NBN™ Connection Box (indoor unit) used for Fibre to the Premises (FTTP) services. These lights may help you quickly check on the status of your NBN™ connection which may be useful when experiencing issues with your service.
This article will also explain where to find the Connection Box's Serial Number, which may be required in order to complete an order for NBN™ services.
Lifting the cover
From mid-2013 onwards, NBN™ Connection Boxes were installed with a plastic cover by default. To access the Connection Box, gently prise the bottom of the cover away from the two clips holding it in place at the bottom of the unit and then lift the cover upwards.
Once lifted, the Connection Box will be partially covered by casing, but you will still be able to see the status lights and access the ports as shown below.
Location of Serial Number
Once the cover is lifted, you'll see a barcode sticker on the right-hand side of the box. The number next to S/N is the Connection Box's Serial Number, as shown below.
Status lights
Light | State | Meaning | |
POWER | Off | No power supply. Please note that all other lights will be off if the Connection Box has no power. | |
Red | Connection Box is operating on backup battery power from the Power Supply unit. | ||
Green | Connection Box has power. Sometimes the light may look more orange/yellow than green - this is fine. | ||
OPTICAL | Off | Connection Box is disabled. Please call us on 1300 847 201 for assistance | |
Red | No connection to the fibre network. | ||
Green | Connected successfully to the fibre network. This light will flash during data transfer. | ||
ALARM | Off | Connection Box is working, but no devices are connected. | |
Red | Issue detected. | ||
Green | Connection Box is working with no issues detected. | ||
UNI-D 1/2/3/4 | Off | Nothing is plugged into this port. Only one UNI-D port is active for a single NBN™ service. This is typically port UNI-D 1. If this port doesn't work and you don't know which port was activated for your service, please call us for assistance on 1300 847 201 | |
Orange | A device capable of up to 1000Mbps is plugged in. This light will flash during data transfer. | ||
Green | A device capable of up to 10/100Mbps is plugged in. This light will flash during data transfer. | ||
UNI-V 1/2 | Off | There is no NBN™ Fibre Phone service, or it's not currently being used. | |
Green | One or more Fibre phones are off the hook (typically because they are being used). | ||
Flashing |
One or more Fibre phones have been off the hook for more than an hour. If no one is on a long phone call, check that your handsets are not engaged and have been returned to the hook or cradle. | ||
UPDATE | Off | Normal, no action required. | |
Red | Connection Box has failed to download an update. | ||
Green | Connection Box is currently downloading an update with no issues. |